(1) Finished size of 11.75in tall x 10.75in wide
**Note: If you want to do the embroidery straight onto the panel, another size, or wish to NOT do any embroidery, ensure the final front panel is 11.75in tall x 10.75in wide.
(1) 11.75in tall x 10.75in wide
(2) 11.75in tall x 10.75in wide
(2) 11.25in tall x 10.25in wide
(2) 10in x 1in
**Note: I prefer to use fusible batting as it makes it much easier to piece, but it is not required, any normal batting should work fine.
Handles: (2) 10in by 2.5in
Fuse batting to back of front and back pieces, leaving ~ a 1/4in around the edge.
**Note: If you wish to do any quilting to the outside of the bag, this is where you would complete that step.
Sew the two lining pieces together, right sides together, around three sides, leaving one of the 10.75in sides open. Clip the corners.
Sew the two outer pieces together, right sides together, around three sides, leaving the top open. Clip the corners.
Iron fusible batting to middle of the back of a handle piece. Sew the long edges together and turn. Repeat for the other handle piece.
Press the handle pieces with the seam in the middle. Sew an 1/8in seam on each side on the handle.
On the outside piece, grab a corner and pinch the bottom and the side seam together until the seams align. Pin, then mark 1.75in up the seam. Draw a line across the corner at that point and sew on the line, ensuring you backstitch both and the beginning and the end of the seam. Trim 1/4in from the seam. Repeat for the other corner.
Repeat Step 6 for the lining piece. Flip right sides out.
Place the lining piece in side the outer piece so that the right sides are together. Line up the seams and pin in place.
Pin the handles in place between the outer piece and the lining about 2.5in from the outside with the handle seam facing the inside of the bag.
Sew a 1/4in around the top of the bag, ensuring to backstitch at each handle and leaving a ~2in opening on the back side of the bag.
Turn the bag right side out and stuff the liner inside.
Pin the opening of the bag closed and sew an 1/8in seam around the top of the bag.
If desired, sew on snap , button, or velcro.
Linking up to: